Adelaide Gutter Repairs

Gutter Repairs Adelaide & Fixing

Roof Leaks

Sick and tired of those dripping and rusted out guttering and blocked down pipes? Want some experienced advise on gutter repairs in Adelaide, SA? Have you decided to fix the gutters and repair roof leaks yourself? We offer a wide range of guttering services so why not follow our simple and informative gutter repair guide and easily fix several of the major problems that arise with gutters and down pipes. Every year home owners should check for signs of water damage and water leaks in the roofing or guttering.

The first place to check for any water damage and rust in the gutters is to locate the down pipes and clear them out with garden hose with the water turned on and the tap open fully for maximum water pressure. Down pipes need regular flushing and checking to make sure that they are clean and not blocked up.

Made all the gutter repairs or the guttering does not need repairs but you still have water leaks in the roofing, then start looking for blocked valleys, deteriorated sealant around skylights, cracked tiles, and exhaust pipes on the roofing.
There are several locations in a guttering system that is prone to getting blocked up with rubbish and starts rusting out if not flushed and cleared regularly to prevent the build up of debris inside the down pipes.

Blocked down pipes are one of the most common problems people have with gutters, down pipes and roofing when it starts raining in Adelaide, South Australia. It is important to not rush any guttering repair work that is done on roofing or at locations than an injury from a fall may occur. Always make sure when replacing or repairing the gutters, the repair isn’t rushed, preparation of the guttering/roofing is done correctly and everyone works in a safe and careful manner.

Another very common problem that causes water leaks are the various kinds of “Stratco” style verandahs that are built onto a property and no regard is given to ensuring the verandah sheeting does not partially close up the properties original roof gutters. Over time the the weight of the added on verandah can pull on the frame of the home and cause the gutters to move and no longer flow freely towards the down pipes and outlets to any water tanks. Quality Gutter Repairs Adelaide provide the best gutter and down pipe replacement service in South Australia.

When checking over a properties roofing for any roof and gutter repairs that may be needed, the down pipes are the best places to start. Make sure all down pipes are not blocked up by cricket balls or other hard objects. When the blocked down pipes are cleared go along all the guttering and check for white or green stains under the gutters or behind the down pipes. White stains around or on the gutters surface is often a sign of water leaks and the beginning of corrosion to the gutters.

If the gutters are still in an overall reasonable condition but there are several rust holes, then it is possible to repair the gutters with a double sided flashing tape that will act as a patch over the rust holes. Applying a rubber spray on sealant after the patch has been installed is also good to prolong the life of the temporary gutter repair.

Most local hardware stores sell various lengths of flashing repair tape designed for patching up rusted gutters and down pipes. Flashing tape to repair rust holes in gutters and blocked down pipes is only a temporary fix and should be properly replaced sooner rather than later.

If the gutters and down pipes only have minor surface rust that is beginning to corrode the guttering, then lightly sand the surface rust and then treat with a “rust kill” primer and paint with the color that matches the d├ęcor of the property. Metal down pipes often get blocked up, then slowly corrode and eventually rust out completely causing major water leaks and other water damage around the home.

When painting gutters and down pipes always use a primer with a rust treatment prior to the final painting. If your wanting to replace any rusted out metal down pipes, then why not consider a down pipe replacement that is rust proof? Installing PVC downpipes is a great solution when replacing rusted metal down pipes.

Minor leaks around a gutters joins and corners when ever it rains has to be one of the most common gutter repairs requested ever winter by South Australians. Have you got minor leaks at the joins and corners of your guttering system and down pipes? Follow this simple guide to repair and re-seal the worn out silicone sealant.

When conducting gutter repairs or replacing a down pipe, consider buying quality tools, materials and equipment. When using the correct tools and quality materials on a gutter replacement, the job will be a lot easier and the workmanship will always looks much better.

Why do gutters leak at the joins and corners of the guttering, even though there are no signs of rust or physical damage? The reason why minor leaks happen on guttering systems is due to the silicone sealant used to join gutters and down pipes eventually breaks down and deteriorates causing water leaks in the gutters or down pipes. Minor leaks can be repaired quite easily with a quality gutter repair and roofing silicone by anyone with basic home maintenance skills.

Do the gutters have water leaks at the gutter and down pipe joins? Are the gutters leaking and need to be repaired to prevent further water damage and corrosion? Are you wanting to re-seal your gutters and down pipes due to the deterioration of the silicone sealant by the harsh South Australian climate?

Then always make sure you clean the surface area of the guttering that needs new sealant with a wax and grime remover. Its very important to remember that before applying the fresh silicon ensure to remove all the old silicone to make this gutter repair job easier, cleaner and with a much better seal that should last another several years.

A common problem when trying to re-seal leaking gutters and down pipes is getting silicone stuck to fingers and creating a sticky mess rather than a clean seal that is needed for a quality seal when repairing gutters. Need a simple way to stop silicon sticking to your fingers when applying to the gutters and roofing? Then make the following quick and easy solution which will stop the gutter and roofing sealant sticking to your fingers. Get a small container, put 1 liter of water with a few big squirts of detergent and stir slowly. Dip your fingers in the solution before using your finger to apply silicone.